RU EN TR
Printing Works

Printing press

Printing is the reproduction of pictures and writing samples by means of printing. A magazine, newspaper, book, stamp, or box of chocolates has an original. With the mold made from this original sample, it can be printed as much as desired.
 

What is the printing press?

Typefaces, pictures and illustrations form the basis of printed materials. E.g; While only text is used on a bus ticket, a stamp has text, picture or illustration. Before printing, the designer (graphic designer) makes the first preparations. Organizes the page by transferring the picture or text to the computer. When the work is finished, the movie outputs are taken. This film must be molded in order to go to press. The negative of the page sample is placed on the plate, which is usually made of metal and is covered with a photosensitive chemical substance, and is kept under strong light. After this process called exposure, the light-sensitive substance in the mold is cleaned and the images on the film come out on the mold where the light hits. The sample is now ready to print.
 
Thanks to the developing technology, many printing houses can transfer their designs directly from the computer to the mold. This system, which eliminates film and assembly works, is called CTP.
 
There are three basic printing techniques used today. Offset, letterpress and intaglio printing… Offset is the most widely used printing technique. It is based on the principle that oil absorbs ink and does not accept water. Since the sample transferred to the mold is lubricated, it absorbs the ink. Empty areas that will not be printed do not absorb the ink because they are wet, not oily. Paper is loaded into the machine in layers. Offset dies, mostly made of aluminum, are easily wound onto the cylinder. During printing, two rollers touch the mold; one wets the mold while the other lubricates it. Then a rubber roller passes over the mold. The ink is transferred first to the rubber and then to the paper.